Sharp AF-R120DX, AF-S100DX Temp, High, Operating With The Remote Control, l1.0h12h, Transmitter

HOW TO OPERATE

OPERATING WITH THE REMOTE CONTROL
POWERON/OFF		TRANSMITTER
		POWER ON/OFF button
		Push to start or stop the operation.
		TEMPERATURE setting button
TEMP.		TEMP.				°			HIGH
			---Raise temp. setting 1 F at a time.
		TEMP.	---Lower temp. setting 1°F at a time.
	SELECTOR								MED
		SELECTOR button
SET	TIMER/OFF								LOWCOOL
		Push to change fan speed and operation
		mode.
									HIGH
		Fan speed and operation mode
		selections are shown to the right.
									MED
		SET TIMER/OFF button							LOWFAN
		Push to	delay "OFF" timer during operation.
		• The time		will change as you push the button. The display
		Previouset(0setting.5h)			C0.L(cance5h	l)1.0h12h	1.5h	11h		10h

will change as follows;

•The last OFF time setting is memorized by the unit and will appear on the display when the button is pushed.

•The timer will be set, 5 seconds after the SET TIMER/OFF button is pushed for the last time.

•If you wish to cancel the timer, push the SET TIMER/OFF button again after the time is set or, push the SET TIMER/OFF button until CL (cancel) appears on the display. A double beep will sound when the timer is cancelled.

•The "ON" TIMER cannot be set with the remote control.

It can only be activated by the TIMER ON/OFF pad on the unit's control panel ( See page 14 ).

To change temperature setting when ON/OFF timer is in use

1. Push a TEMPERATURE setting button.

The current set temperature will be recalled on the unit's display.

2. Use the TEMPERATURE setting buttons to set the new temperature.

The new set temperature will show on the display for 5 seconds and return to the time display.

17