Sharp AF-S155NX 7Install Window Lock and Sash Seal, 8Install Chassis into Cabinet and Install Front to Unit, 6ExtendPanels Window Filler

6ExtendPanels Window Filler

1.Carefully raise window to expose filler panel locking screws. Loosen screws so filler panels slide easily.

LOCKING SCREWS

2.Extend panels to fill window opening completely. Tighten locking screws on top.

3.Close window behind top angle.

7Install Window Lock and Sash Seal

1.Trim sash seal to fit window width. Insert into space between upper and lower sashes.

WINDOW SASH SEAL

2. Attach right angle safety lock as shown.

SAFETY LOCK

3/4" long hex- head screw

8Install Chassis into Cabinet and Install Front to Unit

1.Lift air conditioner and carefully slide into cabinet leaving 6" protruding.

2.DO not push on controls OR finned coils.

3.Be sure chassis is firmly seated towards rear of cabinet.

4.Installation of front is the reverse of removal outlined in Section 1.