|
| COPIER INSTALLATION |
Be sure to allow the required space around | 8"(20cm) | 8"(20cm) |
the machine for servicing and proper |
|
|
ventilation. |
| 4" |
4" |
| |
(10cm) |
| (10cm) |
A small amount of ozone is produced within the copier during operation. The emission level is insufficient to cause any health hazard.
NOTE:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier in a ventilated area.
CAUTIONS ON HANDLING
Be careful in handling the copier as follows to maintain the performance of this copier.
Do not drop the copier, subject it to shock or strike it against any object.
Do not expose the drum cartridge to direct sunlight.
Doing so will damage the surface (green portion) of the drum cartridge, causing smudges on copies.
Store spare supplies such as drum cartridges and TD cartridges in a dark place without removing from the package before use.
If they are exposed to direct sunlight, smudges on copies may result.
Do not touch the surface (green portion) of the drum cartridge.
Doing so will damage the surface of the cartridge, causing smudges on copies.
2
Installation
9
