13
GETTING STARTED
1Gently lift and pull out the paper tray until it stops.
2Push the pressure plate down until it locks in place.
3Fan the copy paper and insert it into the tray. Make sure

the edges go under the corner hooks.

●If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
●Set the paper along the guides.
●The tray holds up to 250 sheets of 21 lb. bond paper.
Do not load paper above the maximum height line.
4Push the paper tray firmly back into the copier.
Loading copy paper
Maximum height line
LOADING COPY PAPER
To save space, this copier has been designed with an adjustable front-loading
tray, which is easily opened for paper loading. For best results, use only
SHARP recommended paper. (See page 40.)
The paper required ( ) indicator will light up when there is no copy paper
in the selected paper feed station, or when the paper tray is not installed or is
improperly installed.
If you change the copy paper size in the tray, be sure to
set the paper size using user program No. 21. See page
32.