33
GENERAL INFORMATION
4Select the desired parameter using the right copy quantity
() key.
●The entered parameter number will blink on the right side of the copy
quantity display.
●The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., enter 2.
USER PROGRAMS
User programs
Program name Parameters
Auto clear time 0 e OFF 1 e 30 sec. *2 e 60 sec. 3 e 90 sec. 4 e 120 sec.
5 e 10 sec.
Preheat mode 0 e OFF 1 e 30 sec. 2 e 60 sec. *3 e 90 sec. 4 e 120 sec.
Auto power shut-off timer *1 e 30 min. 2 e 60 min. 3 e 90 min. 4 e 120 min. 5 e 240 min.
Auto power shut-off setting 0 e OFF *1 e ON
Paper size setting 1 e 11"x17" 2 e 8-1/2"x14" *3 e 8-1/2"x11" 4 e 8-1/2"x11"R
5 e 5-1/2"x8-1/2"
Factory default settings are indicated with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding function will be disabled.
5Press the START ( ) key.
●The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6To continue with other user programs, press the CLEAR
() key and then repeat steps 2 to 5. To exit the user
program mode, press the light ( ) key.
●All the alarm indicators will go out.