Sharp AL-2060 Adding a original to polling memory:, Deleting originals from polling memory:

74
SPECIAL FUNCTIONS
Adding a original to polling memory:
Use this procedure to add an original to another
original that has already been scanned into polling
memory. Place the original in the RSPF or on the
document glass and follow the steps below.
1Press the [MENU] key.
2Press the [ ] key ( ) or [ ] key ( )
until "7:MEMORY POLL MODE"
appears, and then press the [OK] key.
3Press the [ ] key ( ) or [ ] key ( )
until "1:SET" appears, and then press
the [OK] key.
4Press the [ ] key ( ) or [ ] key ( )
to select the number of times polling
transmission will take place and press
the [OK] key.
"1:1 TIME" or
"2:REPEAT" can be
selected as the number
of polling operations
allowed.
5Press the [START] key ( ).
Deleting originals from polling memory:
Follow the steps below to delete originals that have
been scanned into polling memory.
1Press the [MENU] key.
2Press the [ ] key ( ) or [ ] key ( )
until "7:MEMORY POLL MODE"
appears, and then press the [OK] key.
3Press the [ ] key ( ) or [ ] key ( )
until "2:CLEAR" appears, and then
press the [OK] key.
4Press the [START] key ( ).
1,2,3,
1,2,3,
SP. FUNC
"7:MEMORY POLL MODE"
Selection
"1:SET"
Selection
1,2,3,
1,2,3,
SP. FUNC
1,2,3,
1,2,3,
SP. FUNC
"7:MEMORY POLL MODE"
Selection
"2:CLEAR"
Selection