Selecting Temporary Copy Settings
54
If MEMORY IS FULL appears...
If the memory becomes full while multiple originals are being scanned using
the auto document feeder, MEMORY IS FULL will appear in the display.
iPress if you want to make copies of only the originals that have
already been scanned. The remaining originals will be ejected from the
feeder.
iPress if you want to cancel the copy job.
Selecting Temporary Copy SettingsYou can adjust one or more of the following temporary copy settings before
pressing to begin copying.
Enlarge/reduce
Press one or more times until the desired enlargement or reduction
percentage appears in the display. The preset percentages are 100%, 78%
(legal to letter size), 64%, 50%, 25%, 400%, 200%, and 129% (letter to legal
size).
iAfter selecting one of the above preset percentages, you can press
or to increase or decrease the percentage in increments of 1%.
The maximum percentage is 400% and the minimum percentage is 25%.
When the desired percentage appears, press the key.
Example: Press twice and then to select 78% (legal to letter size)
ZOOM
ZA
ENTER
ZOOM
ENTER
LGL TO LTR: 78% 78% LTR 01