Using an Extension Phone to Send a Fax
83
3. Sending
Faxes

Default Line Monitor setting

The default setting for Line Monitor (listening to the line and fax tones through
the speaker during a fax transmission) is initially MONITOR OFF. If desired,
you can change the default setting to MONITOR ON.
1Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2Press twice.
3Press to select MONITOR ON or
to select MONITOR OFF.
4Press repeatedly to exit.
FAX MENU
Display:
FAX SETTING
1: MONITOR ON
The display briefly shows
your selection, then:
4: TIMER SEND
Using an Extension Phone to Send a Fax
If you have connected an extension phone to the TEL. SET jack on the
machine as explained on page 15, you can use the extension phone to send a
fax.
iUsing an extension phone to send a fax allows you to listen to the line and
talk to the other party before faxing.
iThis procedure cannot be used when the machine is busy with another job.
Note that if the transmission is not sucessful because the line is busy or a
line error occurs, automatic redialing will not take place.
1Make sure that the date and time display of fax mode appears (if needed
press ).
FAX