Using FAX ONLY Mode
94
Using FAX ONLY Mode
When the reception mode is set to FAX ONLY, the machine will automatically
answer all calls on one ring and receive incoming faxes.
iThe number of rings on which the machine answers can be changed as
explained below.
iWhen the reception mode is set to FAX ONLY mode, the machine will
receive faxes automatically no matter whether it is in copy, fax, or scan
mode.

Changing the number of rings

If desired, you can change the number of rings on which the machine answers
incoming calls in FAX ONLY mode. Any number from 0 to 9 can be selected.
iTo have the machine answer without ringing, enter 0.
1Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2Press .
3Press .
4Enter the desired number of rings (any
number from 1 to 9), or enter 0 to have
the machine answer without ringing.
Example: 3 rings
5Press repeatedly to exit.
Note: When using Distinctive Ring (page 98), the machine will answer calls
after two rings regardless of the above setting (unless 0 is selected for no
ringing).
FAX MENU
1:RECEPTION MODE
Display:
FAX SETTING
The display briefly shows
your selection, then:
3: RECEIVE RATIO
ENTER (0-9) (1)
NUMBER OF RING