Installing the wall-mount bracket (For Model 65 inch Separate Type)
Caution
• Be sure to use at least two people to perform the
• The installation work must be conducted while the LCD color TV is standing upright, so be careful that it does not fall over.
Place the LCD color TV on a strong stand
1 about 20 to 30 cm high and remove the two back terminal covers.
Two terminal covers, top and bottom
Remove the terminal covers while
the LCD color TV is standing upright.
(2 covers top and bottom)
ENGLISH
2 Remove the 3 fastening screws from both the left and right stands on the back of the LCD color TV.
Keep the removed screws (short × 2 screws, long × 4 screws).
Long screws
Short screw
3 | (1) Remove the 2 screws | from each of the stand edge covers (total of 4 screws from the |
left and right sides). |
|
Use the removed screws (total of 4 screws) as shown in Step 2 on page 9.
(2) Remove the stand fastening screws (2 screws each on the left and right sides).
Edge covers | Removing the edge covers reveals |
| the stand fastening screws in the |
Edge cover screws | center of the stands, so remove |
| these screws. |