Set the angle of the wall-mount bracket
Caution | • Please perform this work before mounting the LCD color TV on the wall. |
| |
| • When setting the angle of the |
Remove the perpendicular positioning screws from the
1 each on the left and right sides).
Hole at the very top
Included part
Angle setup bracket screws
Angle setup bracketM8 length: 15mm (2 screws)
These screws are used for the angle setup in Step 2.
ENGLISH
2 | Assemble the included angle setup | brackets as shown in the illustration and then use |
them to set the TV to the desired angle. |
|
For the screws, use the included angle setup bracket screws (M8 length: 15 mm × 2 screws) and screws removed in Step 1.
First loosely tighten the 4 screws and then securely tighten them after the angle setup bracket is set to the desired position.
The numbers 5, 10, 15, and 20 at the screw holes mean that the higher the number, the more the LCD color TV slants downward. The angle that can be set is limited depending on the TV model.
0 20
° | ° | 5° |
° 15 | 10 |
|
20 |
|
|
0 |
|
|
20 |
|
|
15 |
|
|
| 15 |
|
10 |
|
|
5 | 10 |
|
5 |
| |
|
|