| #$%&Carry'out the network setting for the Print Server Card. | |
<6>Connect the cables to the control PWB. |
| 3) Prepare to enable the printer expansion function. |
Connect all the cables that have been removed in <2> to the original | To enable the printer expansion function, use the keys on the operation | |
positions of the control PWB unit. |
| panel to enter the product key. |
|
| For entry of the product key, see the key operator's guide of the operation |
|
| manual for the main unit. |
If another peripheral device must be installed, carry out the following steps at the end of the installation work.
2)Turn on the main switch of the main unit of the printer. Insert the power plug of the main unit of the printer to the outlet.
Then, turn the main switch located on the front side of the main unit to the "ON" position.
If the machine is equipped with a facsimile unit, turn on the FAX power switch.
Use a key operator program to carry out the network setting for this machine. For this network setting, the customer's network environment must be checked. Consult the network administrator to carry out the setting.
In addition to the network setting for this machine, to use the machine in the network environment:
According to the customer's network environment, install the driver software from the
For installation in the server computer and network setting, see the operation manual supplied with the main unit.
This setting must be carried out by the network administrator or based on consultation with the network administrator.
4) To check the operation of the printer expansion function.
When the network settings and the driver settings are complete, perform a test print to check if printing can be performed successfully.
(When test printing is completed successfully, use the "list print" key operator program to print the network settings and keep the printout for future reference.)
Installation of
