Sharp BD-HP80U Player setup orientation, Removing and replacing the terminal cover

Player setup orientation

Removing and replacing the terminal cover

Before connecting the player to a TV, the AC adapter, etc., remove the terminal cover on the bottom of the player.

1Remove the terminal cover on the bottom of the player.

b Bottom side of the player

Securing bracket for the HDMI cable

The terminal cover has a securing bracket to prevent breakage of the HDMI cable. When the HDMI cable is not passed straight through the securing bracket, the terminal cover cannot be closed.

b Back of the terminal cover

Securing bracket for the HDMI cable

2Make the necessary connections to the player (pages 18–21, 23).

3Replace the terminal cover.

•Pass the cables through the center of the terminal

cover.

b Bottom side of the player

Pass the cables through here.

•Replace the terminal cover so the cables pass through the center of the cover.

b Bottom side of the player

Installation example

Remote control sensor setting

You can select the remote control sensor from “Front”
or “Top” depending on the orientation of the player and
	Connection
the usage situation. In most cases, the selector switch
should be set to “Front”.
Remote control sensor “Top”

Remote control sensor “Front”

FRONT	Selector switch for
TOP
	Remote control sensor

17