Sharp BD-HP80U operation manual When selecting Wireless, Press a/b to select Complete, then press

SETTINGS

10For testing the connection to the Internet, after confirming the settings, press a/b to select “Test”, then press ENTER.

•“Test” is available only when setting to obtain the IP address automatically. “Test” cannot be selected if the IP address has not been obtained automatically.

Confirm the current setting.

IP Address	: xxx xxx xxx xxx
Netmask	: xxx xxx xxx xxx
Gateway	: xxx xxx xxx xxx

DNS Address : xxx xxx xxx xxx

xxxxxx xxx xxx

MAC Address : xx xx xx xx xx xx

Test

Complete

•As a result of the test, if the Internet connection fails, enter the setup values manually.

11Press a/b to select “Complete”, then press

ENTER.

When selecting Wireless

CAUTION

•When performing the wireless communication setup, security information for the wireless router/access point (WEP, WPA or WPA2 key) is required. Check your wireless router/access point’s information prior to setup.

NOTE

•Before this player can access the Internet wirelessly, setup of a wireless router/access point is required.

1Press HOME to display the menu screen.

2Press a/b to select “Settings”, then press d or

ENTER.

3Press a/b to select “Communication Setup”, then press d or ENTER.

4Press a/b to select “Ethernet Setup (Wireless)”, then press d or ENTER.

5Press a/b to select “Change”, then press

ENTER.

Current Ethernet setup info.

MAC Address : xx xx xx xx xx xx

Access Point	: Not Selected
IP Address	: Auto Setup
Netmask	: Auto Setup
Gateway	: Auto Setup
DNS	: Auto Setup
	Change
	Initialize

•For initializing the current setting, select “Initialize”, then press ENTER.

6The player scans all of the available access points and displays the points with the “Other Network” selection bar on the screen.

•During searching access point(s), “Accessing...” appears on the screen.

•Up to 6 items (5 access points and the “Other Network” selection bar) are displayed on the screen.

•When there are six or more items retrieved, display the next screen by selecting “Next”, then pressing ENTER. (The “Other Network” selection bar is always displayed last.) When no available access points are retrieved, only the “Other Network” selection bar is displayed on the screen.

44