Sharp BD-HP80U Connecting the AC adapter, Turning the power on, Turning the Power On

Before Starting Playback

Connecting the AC adapter

1Plug the AC adapter cord in to the DC IN terminal on the rear of the Player.

2Plug the supplied AC cord into the AC adapter.

3Then, plug into an AC outlet.

Turning the power on

Press POWER on the remote control or on the Player to turn on the power of the Player.

• The POWER indicator lights green.

NOTE

•When you turn on this player for the first time after purchase or when you turn on this player after you perform “System Reset” (see page 42), the language setting screen will be displayed, so please perform the language setting (see step 4 of page 24).

AC adapter

AC cord

NOTE

•Place the Player close to the AC outlet, and keep the power plug within reach.

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE UN-INSULATED PARTS OF ANY CABLES WHILE THE AC CORD IS CONNECTED.

•The AC adapter may become warm after long-time use. This is normal and does not indicate malfunction.

•If you are not going to use this Player for a long period of time, be sure to remove the AC cord from the AC outlet.

Turning the Power On

BD/DVD/CD mode indicator

POWER

POWER (ON/STANDBY) indicator

AQUOS PURE MODE indicator

Entering standby

Press POWER on the remote control or on the Player to enter standby.

•The POWER indicator lights red.

•If you press POWER again immediately after entering standby, the Player may not turn on. If this happens, wait for 10 seconds or more and then turn on the power again.

Indicators on the Player
POWER (ON/STANDBY) indicator
Green on	Power on
Red on	Standby
AQUOS PURE MODE indicator
Green on	Output in AQUOS PURE
	MODE (See page 25.)
BD/DVD/CD mode indicator
Blue on	Playing back
Blue blinks	Loading a disc/updating
3D indicator
Green on	Video signal output is 3D
	images (See page 25).

Playback

3D indicator

23