05/3/8 CD-SW200EA 23- 30.fm
30
CD-SW200E
Tape RecordingRecording on a cassette tape (continued) Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Recording from the radio
To interrupt recording:
Press the button.
To resume recording, press the / (TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1 Perform steps 1 - 5 in "Recording from a CD or MP3/WMA disc"
on page 29.
2 Within 5 seconds, press the / (TAPE ) button to start record-
ing.
1 Programme discs and tracks (see page 20).
2 Press the button.
3 Press the / (TAPE ) button to start recording.
1Tune in to the desired station (see page 25).
2Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3Press the button.
Recording will be paused.
4Press the / (TAPE ) button to start recording.
1Press the ON/STAND-BY button to turn the power on.
2Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
4Press the button.
Recording will be paused.
5Press the / (TAPE ) button to start dubbing.
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing towards you.
2 Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
3 Press the button.
4 Press the / (TAPE ) button to start erasing.
TAPE 1 TAPE 2