05/3/8 CD-SW200EA 31-40 .fm

34

CD-SW200E

Advanced Features

Timer and sleep operation (continued)

Sleep operation

The radio, CD, MP3/WMA disc and cassette tape can all be turned
off automatically.

To confirm the remaining sleep time:
To cancel the sleep operation:

Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.

To use timer and sleep operation together

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.

Sleep and timer recording:

For example, you can fall asleep listening to the CD and record radio
programmes whilst sleeping.

Caution:

When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the sleep
timer setting, timer playback or recording will not be possible.

1

Play back the desired sound source.

2

Press the CLOCK/TIMER button.

3

Within 10 seconds, press the
or button to select
"SLEEP", and press the MEMO-
RY/SET (MEMORY) button.

4

Press the or button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)

3 hours - 5 minutes 5-minute intervals

5 minutes - 1 minute 1-minute intervals

5

Press the MEMORY/SET
(MEMORY) button.

"SLEEP" will appear.

6

The unit will enter the power stand-by mode automatically
after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep op-
eration finishes.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select
"SLEEP X : XX".
"X : XX" is remaining sleep time.

The remaining sleep time is displayed for about 10 seconds.

You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY/SET (MEMORY) button.

1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY/SET (MEMORY) button.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 31 - 32).
Sleep timer setting
Timer playback or
recording setting
Sleep operation will
automatically stop.
Timer playback or recording
start time
End time
1 minute - 3 hours Desired time