Sharp CP-SW1000H Subwoofer preparation, Placing the subwoofer, Magnetically shielded speakers

Subwoofer preparation

Make sure to unplug the AC power lead before installing the main unit or changing the position.

Select from three installation methods according to the preferred position.

Horizontal position

Using spikes

1 Tighten all spikes as shown

Notes:

When attaching the spikes, place the subwoofer on a cushion or soft cloth to avoid damage.

The subwoofer can be leveled by adjusting the spikes.

Caution:

When using these spikes on glossy or slippery table such as on glass top, this subwoofer may slip and fall off the table.

Using foot cushions

1 Attach the foot cushions as shown

Note:

When attaching the foot cushions, place the subwoofer on a cushion or soft cloth to avoid damage.

Vertical position 1 Place subwoofer stand as shown

Stand

Placing the subwoofer

Installation image:

TV

VCR	DVD player
VCR	DVD player

Place the subwoofer as shown.

Notes:

As the bass sound from the subwoofer is omni-directional, you can place the subwoofer anywhere you like. However, it is recommended to place it as close to the TV as possible.

The front panel of the subwoofer is not removable.

Caution:

Do not change the installation direction when the subwoofer is turned on.

Do not allow any objects to fall into or to be placed in the bass reflex ducts.

Do not stand or sit on the subwoofer as you may be injured.

Magnetically shielded speakers

The subwoofer can be placed near a TV set as the built-in speakers are magnetically shielded. However, uneven colours may appear on the screen depending on the type of TV.

If colour variation occurs.

Turn off the TV (from the power switch).

After 15 - 30 minutes, turn the TV on again.

If the colour variation is still present.

Move the subwoofer further away from the TV.

Do not place the unit near any kind of magnet or an electromagnet as irregular colours may appear on the TV screen.

CP-SW1000H

ENGLISH

Preparation for Use

E-4