5/4
ROUNDING SELECTOR:
Example: Set decimal selector to “2”.
4 ⎟ 9 = 0.444 ... , 5 ⎟ 9 = 0.555 ...
4 | 9 | 5 | 9 |
| 0.45 |
| 0.56 |
5/4 | 0.44 |
| 0.56 |
| 0.44 |
| 0.55 |
Note: The decimal point floats during successive calculation by the
use of 
or 
.
If the decimal selector is set to “F” then the answer is always rounded down (
).
DECIMAL SELECTOR:
Presets the number of decimal places in the answer.
In the “F” position, the answer is displayed in the floating decimal system.
PAPER FEED KEY
CONVERSION KEY:
This key is used to obtain a value by dividing a given number with a specified conversion rate.
CONVERSION KEY:
This key is used:
•to store the conversion rate (by the use of the rate setting mode selector).
•obtains a value by multiplying a given number with a specified conversion rate.
•to recall the presently stored rate for
check. Press 
first to clear the calculation register and reset an error
condition, then press 
. The conversion rate is printed with the
symbol “TC”.
LAST DIGIT CORRECTION KEY
CLEAR ENTRY KEY:
Clears numbers entered prior to use of a function key.
Also used to clear an overflow error caused by an entry.
6
