Install the exhaust hose (See Page14), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock.
Ensure that the stopcock is securely inserted into the lower drainpipe nozzle and that the nozzle has not been damaged.
2
1
3
1 | Press the MODE button to select FAN mode. | ||||||||||
|
| COOL DEHUM FAN |
| VENT | |||||||
2 |
|
|
|
|
|
|
|
|
| ||
| Press the POWER button to start operation. | |||||||||||
• | The red OPERATION lamp | on the unit will light. | |||||||||
| • | The temperature cannot be set. | |||||||||
QUIET | LOW | HIGH |
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
Install the exhaust hose (See Page 14), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock.
Ensure that the stopcock is securely inserted into the lower drainpipe nozzle and that the nozzle has not been damaged.
2
1
3
1 |
|
| COOL DEHUM FAN |
| VENT | |||||
|
|
|
|
|
|
|
|
|
| |
2 |
|
|
|
|
|
|
|
|
| |
| Press the POWER button to start operation. | ||||||||||
• | The red OPERATION lamp | on the unit will light. | ||||||||
| • | The temperature cannot be set. | ||||||||
3 Press the FAN button to set the desired fan speed.
•Although the louvers are closed and no air blows out into the room, the external ventilation fan speed changes.
QUIET |
| LOW |
| HIGH |
|
|
|
|
|
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.