TIMER OPERATION

ON TIMER

The unit will turn on automatically according to your setting.

Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour (30-minute) increments and from 10 to 12 hours, in 1-hour increments.

ENGLISH

1

Display shown when you set the unit to turn on 6.5 hours later.
Point the remote control at the signal receiver window on the unit.1Press the ON TIMER button.

•The time setting will change as you press the but- ton as follows.

0.5h 1.0h 1.5h10h 11h 12hHold the button down to speed through the set- tings.

•The orange TIMER lamp on the unit will light.

•The unit will emit a beep when it receives the sig- nal.

•The time setting will count down to show the re- maining time.

Select the mode, temperature and fan speed setting as desired.

•When the temperature is set with the ON TIMER, the temperature will show in the display for 5 sec- onds and then return to the time display.

•If you do not change the setting, the unit will oper- ate using the most recent setting.

TO CANCEL TIMERPress the CANCEL button.

• The orange TIMER lamp on the unit will turn off.

E-23