PRE-OPERATION CHECKS
POWER PLUG CHECK
This air conditioner uses a fused power plug. Always check the power plug before use.
1 Press the RESET button.
2 Insert the power plug into the wall socket.
3 You will hear a CLICK if the circuit breaker is functioning correctly.
4 Press the RESET button until you hear another CLICK.
The circuit breaker is activated, power is supplied, and the air conditioner is now ready for use.
RESET 
TEST
TEST
RESET
Do not attempt to use the air conditioner if the above procedure cannot be performed.
Disconnect the power plug and call for service.
LOADING BATTERIES Use two AAA (R03) batteries.
1 Remove the battery cover at the back of the remote control.
2 Insert batteries into the com- partment, making sure the ± and — polarities are correctly aligned.
•Lines will appear on the display when batteries are properly in- stalled.
3 Reattach the battery cover.
4 Press the RESET button using a thin pointed implement.
NOTES:
Battery cover
•The battery should last approximately one year under normal use.
•When replacing the batteries, always change both batteries at the same time, and make sure they are the same type.
•If the remote control does not operate normally after replacing the batteries, press the RESET button using a thin pointed implement.
•If you will not be using the unit for a prolonged period, remove the batteries from the remote control.