4 Press the FAN button to set the de- sired fan speed.
COOL MODE
Drainage nozzle
"CLOSE" position
Stopcock
Stopcock
Drainpipe nozzle
Install the exhaust hose (See Page14), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock.
Ensure that the stopcock is securely inserted into the lower drainpipe nozzle and that the nozzle has not been damaged.
1 Press the MODE button to select COOL mode.
COOL DEHUM FAN VENT
| Press the POWER button to start op- | ||||
| 2 eration. | ||||
2 | • The red OPERATION lamp on the unit will | ||||
light. | |||||
| |||||
3 | Press the TEMPERATURE button to | ||||
3 set the desired temperature. | |||||
| • The temperature can be set within the | ||||
| range of 64°F to 86°F. | ||||
1 |
|
|
|
| |
|
|
|
| ||
4 |
|
|
|
| |
|
|
|
| ||
AUTO | QUIET | LOW | HIGH |
TO TURN OFF
Press the POWER button again.
•The red OPERATION lamp on the unit will turn off.