Troubleshooting chart (continued)
QRemote control
Symptom | Possible cause |
OThe remote control O Is the AC power cord of the
does not operate. | unit plugged in? |
OIs the battery polarity correct?
OIs the battery dead?
OIs the distance or angle incorrect?
ODoes the remote control sensor receive strong light?
QTuner
Symptom | Possible cause |
OThe radio makes O Is the unit placed near the TV
unusual noises | or computer? |
continuously. | O Is the FM antenna or AM loop |
| antenna placed properly? |
| Move the antenna away from |
| the AC power cord if it is |
| located nearby. |
QiPod and iPhone
| Symptom | Possible cause |
O | No sound is | O The iPod or iPhone is not |
| produced. | playing. |
| No image | O The iPod or iPhone is not |
| appears on the | properly connected to the |
| TV/monitor. | unit. |
|
| O Is the AC power cord of the |
|
| unit plugged in? |
|
| O The video cable is not |
|
| properly connected. |
|
| O The TV/monitor’s input |
|
| selection is not properly set. |
|
| O The iPod TV out feature has |
|
| not been set to output video. |
O | iPod or iPhone | O The iPod or iPhone is not |
| will not charge. | making full contact with the |
|
| connector. |
|
| O The iPod or iPhone is not |
|
| supported. |
|
| O Refer to page 6 for |
|
| compatible models. |
|
| |
O “This accessory | O The iPhone battery is low. | |
| is not made | Please charge the iPhone. |
| to work with | O iPhone is not properly |
| iPhone” or | docked. |
| similar, appears |
|
| on iPhone |
|
| screen. |
|
|
|
|
QIf problem occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1Set the unit to the
2If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
QFactory reset, clearing all memory
1Press the
2While pressing down the OPEN/CLOSE button and the 
button, press the CD button until “CLEAR ALL” appears.
OPEN / CLOSE | CD |
Caution:
This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program.
QCondensation
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
QBefore transporting the unit
Remove the iPhone/iPod, USB memory device and disc from the unit. Then, set the unit to the power
Maintenance
QCleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
Caution:
ODo not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet.
ODo not apply oil to the inside of the unit. It may cause malfunctions.
QCleaning the CD pickup lens
In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the laser pickup lens) should be performed periodically. Lens cleaners are commercially available. Contact your local CD software dealer for options.
