E-14
Setup & Connections

Connecting a computer with analog RGB output

1Connect the DVI end of the DVI to 15-pin D-sub adapter to the INPUT 2 port on the projector.
2Connect the D-sub end of the DVI to 15-pin D-sub adapter to the computer.
When connecting this projector to a DVD player or DTV decoder, select RGB for Signal Type on the OSD menu or press
RGB/COMP. on the remote control. (See page 36.)

Connecting to a Computer

DVI to D-sub 15-pin cable
(sold separately AN-A1DV)
12

Connecting to a DVD Player and DTV Decoder

Connecting to a DTV decoder with analog RGB output
1Connect the DVI to 15-pin D-Sub adaptor.
2Use the above cables to connect the projector and the DTV decoder.
When connecting this projector to analog RGB output of the DTV decoder, select Component for Signal Type on the
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
CAUTION
Make sure to turn both the projector and the video equipment off, before switching the DIGITAL INPUT TYPE swich and
connecting.
DTV decoder
Projector
DVI to 15-pin D-sub adaptor
(sold separately AN-A1DV)
Connecting to a DTV decoder with DVI output
1Slide the DIGITAL INPUT TYPE switch on the back terminal board to VIDEO.
2Connect the DVI cable to the DIGITAL INPUT terminal.
3Connect the other end to the Corresponding terminal on a DVD player and DTV decorder.
When connecting this projector to analog RGB output of the DTV decoder, select Component for Signal Type on the
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
CAUTION
Make sure to turn both the projector and the video equipment off, before switching the DIGITAL INPUT TYPE swich and
connecting.
DTV decoder
Projector
DVI cable
(commercially available)
1
23
DT-200(E)#p12_14.p65 02.11.21, 11:30 AM14