MAINTENANCE INSTRUCTIONS
HOW TO REMOVE THE HEAD COVER
If you find excess dirt or obstructions under the head cover, you can remove the head cover. The head cover is secured by two screws from the bottom side.
Remove the bottom plate, following the | Head Cover |
1 instructions on page 13. |
|
Top Tab 
Remove the agitator assembly and the belt, |
|
2 following the instructions on page17. | Fig.30 |
3 Unscrew(Fig.31) two screws at the nozzle head.
Two screws secure the head cover
Fig.31
4 Lift the top tab of the head cover and remove.
5 When resetting the head cover, be sure to fit the three front tabs in the nozzle head.
Three Front Tabs
Fig.32
14
