Sharp EC-T5180B Step, Dirt Compartment, Air Duct Net Filter assembly, Projection Slot, Guide Mark

3

4

5

Empty dirt compartment. (Fig.21)

Replace the net filter assembly into the dirt

compartment.
Be sure to match the	marks of the Filter
Compartment and Dust Cup.		Upper Handle

Align the projection of net filter assembly to the slot of dirt compartment and follow the arrow to fit or turn to CLOSE side.

Dirt Compartment

Fig.21

Air Duct

Fig.22

Net Filter assembly

Projection

Slot

Fig.23

Align the rectangular groove to the guide

6 of vacuum cleaner then push to snap into place. (Fig.24)

Alsomarks are on Dust Compartment and Base.

STEP 2

Rectangular Mark

Groove

STEP 1

Guide

Fig.24

Mark

CAUTION: Do not use chemicals, bleach or hot water to clean the dirt compartment. Wash with soap and water using a soft brush. Do not dry with hair dryer or heater.

NOTE: Very fine materials, such as face powder, plaster or fine powder may seal the filters and cause loss of suction. When vacuuming this type of material, be sure to empty the dirt compartment and clean the filters more frequently (before reaching the “Max Fill Line”).

11