Troubleshooting
■Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
Problem | Check item | Reference page |
|
|
| • Make sure the AC adapter is properly inserted in the | 8 | |
Sound | Picture | There is no | power outlet. |
| |
|
| • Reception other than those of broadcasting stations can | – | ||
|
| picture or | |||
|
| be considered. |
| ||
|
| sound. |
| ||
|
| • Make sure the input mode is set to TV. | 15 | ||
|
|
| |||
|
|
| • Make sure the POWER switch of the main unit is on. | 14 | |
|
| There is no | • Make sure the BRIGHTNESS is properly adjusted. | 19 | |
| Picture | picture. | |||
| • Fluorescent lamp may have reached the end of service | 34 | |||
|
| There is no | |||
|
| life. |
| ||
|
| picture from |
| ||
|
| • Make sure the | 32 | ||
|
| INPUT2 or | |||
|
| • Make sure the AUDIO ONLY is not set to ON. | 28 | ||
|
| INPUT3. | |||
|
|
|
| ||
|
|
| • Make sure the volume is not set to minimum. | 15 | |
|
| There is no | • Make sure the sound is not set to mute. | 15 | |
|
| • Make sure that headphones are not connected. | 9 | ||
|
| sound. | |||
|
|
|
| ||
|
| There is no | • Make sure the antenna cable is properly connected. | 7, 8 | |
|
| picture or | • Bad reception could be the problem. | – | |
|
| sound, just |
|
| |
|
| noise. |
|
| |
|
|
| • Make sure the antenna cable is properly connected. | 7, 8 | |
|
| Picture is | • Bad reception could be the problem. | – | |
|
| not clear. |
|
| |
|
| Picture is | • Check color adjustment. | 19, 20 | |
|
| • Check COLOR SYSTEM setting. | 22 | ||
|
| light or | |||
|
|
|
| ||
|
| improperly |
|
| |
|
| tinted. |
|
| |
|
|
| • Press the BACKLIGHT button or set the BACKLIGHT or | 19 | |
|
| The picture | BRIGHTNESS settings. |
| |
|
| • Check CONTRAST and BRIGHTNESS adjustment. | 19 | ||
|
| is too dark. | |||
|
| • Fluorescent lamp may have reached the end of service | 34 | ||
|
|
| |||
|
|
| life. |
| |
Remote control does not work. | • Check the batteries of the remote control. | 6 | |||
• Make sure the remote sensor window is not under strong | 6 | ||||
|
|
| lighting. |
| |
|
|
| • The broadcasted EDS signal may be weak. Check the | – | |
The clock (AUTO CLOCK) | antenna. |
| |||
• Carry out EZ SETUP or Setting the CLOCK again. | 12, 13, 21 | ||||
cannot be set. |
| ||||
| • If EDS signal is not sent, set the clock using MANUAL | 13 | |||
|
|
| |||
|
|
| CLOCK Setting. |
| |
|
|
| • External influences such as lightning, static electricity, | – | |
Unit cannot be operated. | etc., may cause improper operation. In this case, operate |
| |||
the unit after first turning the power off the LCD TV set, |
| ||||
|
|
| or unplugging the AC cord and |
| |
|
|
| 2 minutes. |
| |
33