Part Names of the Main Unit

Controls How to adjust the angle

Upper control panel

CH (Channel) INPUT

( )/(

)

VOL (Volume)

MENU POWER

(–)/(+)

 

Tilt the display by grabbing onto the carrying handle while securely holding down the stand with your other hand.

To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward or 10 degrees backward. Please adjust the angle so that the LCD TV set can be watched most comfortably.

Speaker

HEADPHONE jack

Plug the headphone mini-plug into the Headphone jack located on the front of the main unit.

OPC (Optical Picture Control) indicator

The OPC indicator lights up green when “OPC” is set to “ON”. (See page 18.)

Remote sensor

OPC (Optical Picture Control) sensor

A

POWER/WAKE UP TIMER indicator

POWER/WAKE UP TIMER indicator lights up green when the power is on, and red when in the standby mode (the indicator will not light when the main power is off), and orange when the wake-up timer is set (the indicator will light when in the standby mode).

• INPUT, CH ( )/( ), VOL (–)/(+)and MENU on the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control.

Listening with Headphones

■Plug the headphone mini-plug into the HEADPHONE jack located on the front of the main unit.

▼ On-screen display

Headphones

VOLUME 20

Adjust the sound volume using VOL ( + ) /( – ) on the remote control.

A

•Headphones are not included in the supplied accessories.

•No sound is heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack.

•Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.

9