Preparation

Installing Batteries in the Remote Control

Before using the LCD TV set for the first time, install the two “AAA” size batteries supplied in the remote control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

1 Open the battery cover.

2 Insert two “AAA” size batteries.

3 Close the battery cover.

■Slide the cover while pressing the () part.

■Place batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment.

■Engaging the lower claw with the remote control, close the cover.

Caution!

Precautions regarding batteries

■Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

•Place batteries with their terminals corresponding to the (+) and (–) indications.

•Different types of batteries have different characteristics. Do not mix batteries of different types.

•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals.

•Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe it off with a cloth.

•The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.

•If the remote control is not to be used for a long period of time, remove the batteries from the remote control.

Using the Remote Control

■Use the remote control by pointing it towards the remote sensor

window of the main unit. Objects between the remote control and sensor window may prevent proper operation.

30˚

30˚

Cautions regarding use of the remote control

■ Do not apply shock to the remote control. In addition, do not expose the remote control to liquids, and do not place it in an area with high humidity.

■ Do not install or place the remote control in direct sunlight. The heat may cause deformation of the unit.

■ The remote control may not work properly if the remote sensor window is in direct sunlight or strong lighting. In such a case, change the angle of the lighting or main unit, or operate the remote control closer to the remote sensor window.

Remote

sensor

6