Sharp LC-20B4U operation manual Setting the Clock, Press c/dto select Auto or

SETTING THE CLOCK (Continued)

AUTO CLOCK Setting (Continued)

	DISPLAY
SLEEP	PIC. FLIP
	ENTER
MUTE	BRIGHT TV/VIDEO MENU

ENTER/

FLASH-	a/b/c/d
BACK

VOL CH

MENU

5Press c/dto select AUTO or

MANUAL.

6Press a/bto move the cursor to START, and press ENTER.

AUTO CLOCK

RETURN

EDS CH SET [AUTO ]

EDS CH [ ––– ]

START

ADJUST : ENTER : ENTER EX I T : MENU

PLEASE WA I T

NOW SEARCH I NG T IME

●If you do not know the channel that carries EDS signals in your area, select EDS CH SET to AUTO and select START. If you know the channel of the EDS signal carrier in your area, select EDS CH SET to MANUAL. Set the EDS CH and select START.

●When set to “AUTO CLOCK”, the time is acquired automatically when MAIN POWER is turned OFF. (This function will not work when EDS CH is not set.)

STOP

2

STEREO	<ON A I R
SAP	11 : 53AM
MONO

A

•If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK Setting may not operate. In this case, an “EDS CH IS NOT AVAILABLE” message will display, and the MANUAL CLOCK Setting screen appears. Refer to MANUAL CLOCK Setting on page 19 to set the clock manually.

•If you know the Channel of the EDS signal carrier in your area, set EDS CH SET to MANUAL and select START. In case, the message “EDS CH EDS DATA IS NOT AVAILABLE” displays, set EDS CH SET to AUTO when the AUTO CLOCK Setting screen appears.

•CLOCK: AUTO CLOCK Setting may take several minutes to execute depending on the number of channels to receive and status of signals.

18

LC-20B4U(E)-b 18 03.2.26, 3:26 PM