Sharp LC-22SV6U SETTING THE CLOCK Continued, AUTO CLOCK Setting Continued, Enter, Menu

SETTING THE CLOCK (Continued)

AUTO CLOCK Setting (Continued)

BRIGHT			Virtual	AV		MODE
POWER
FREEZE	DISPLAY		VIEW	MODE
SLEEP				PIC.	FLIP
MENU	ENTER
				MENU
RETURN
MUTE	AUDIO	CC TV/VIDEO
	ONLY						ENTER/
			FLASH-
							a/b/c/d
VOL	CH		BACK

MENU

FAVORITE CH

A B C

5Press a/bto move the cursor to EDS CH SET, and press ENTER.

6Press c/dto select AUTO or MANUAL, and press ENTER.

7Press a/bto move the cursor to START, and press ENTER.

●If you do not know the channel that carries EDS signals in your area, select EDS CH SET to AUTO and select START. If you know the channel of the EDS signal carrier in your area, select EDS CH SET to MANUAL. Set the EDS CH and select START.

●When set to “AUTO CLOCK”, the time is acquired automatically when MAIN POWER is turned OFF. (This function will not work when EDS CH is not set.)

AUTO CLOCK

RETURN

EDS CH SET [AUTO ]

EDS CH [ ––– ]

START

ADJUST : ENTER : ENTER EX I T : MENU

PLEASE WA I T

NOW SEARCH I NG T IME

STOP :

2

STEREO	<ON A I R
SAP	11 : 53AM
MONO

A

•CLOCK: The AUTO CLOCK Setting may take from several minutes to an hour depending on the number of channels to receive and signal status.

•If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK Setting may not operate. In this case, an “EDS CH IS NOT AVAILABLE” message will display, and the MANUAL CLOCK Setting screen appears. Refer to MANUAL CLOCK Setting on page 19 to set the clock manually.

•If you know the Channel of the EDS signal carrier in your area, set EDS CH SET to MANUAL and select START. In case, the message “EDS CH (XXX) EDS DATA IS NOT AVAILABLE” displays, set EDS CH SET to AUTO when the AUTO CLOCK Setting screen appears.

•If broadcasting channels are not memorized, EDS signals cannot be received even when the EDS CH SET is set to AUTO. In this case, try EZ SETUP again. (See page 40.)

18