After all the available stations have been stored a channel list will be shown based on the broadcaster LCN press OK to accept this channel order and start viewing or use the Edit functions to change the order or delete unwanted channels.

• Press OK button to quit channel list and watch TV.

English

Installation

Press “MENU” button on the remote control and select Installation by using “” or “” button. Press OK button and the following menu screen will be displayed.

Select Automatic Channel Scan (Retune) by using ”/“button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select Digital Aerial, Analogue or Digital Aerial- Analogue tuning using ”/“and OK buttons.

Automatic Channel Scan (Retune) Menu Operation

Digital: Searches and stores aerial DVB stations.

Analogue: Searches and stores analogue stations.

Full: Searches and stores both analogue and aerial DVB stations.

Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“” or “” and OK button.

After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. Press “MENU” button to cancel process. In such a case, located channels are not stored.

- 17 -

00_MB60_[GB]_(01_TV)_1910UK_IDTV_PVR_BRONZE17_24942LED_

YPBPR_ROCKER_10072636_50186854.indd 17

17.08.2011 14:10:26

Page 18
Image 18
Sharp LC-24DV510K operation manual Installation, Automatic Channel Scan Retune Menu Operation