DTV menu operations
Child Lock
This function allows TV and Radio services to be
restricted. It prevents children from watching violent or
sexual scenes that may be harmful.
Press c/d to select “System Setup”.
Press a/b to select “Child Lock”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
Press c/d to select the desired age/rating (4
...18/Universal/Parental/X-rated/None), and then
press OK.
1
2
3
4
Software Upgrade
The software for controlling the built-in DTV decoder
can be upgraded when necessary. In Great Britain
and Sweden this can be achieved via an Over Air
Download.

Preparation

Confirm and make a note of the current software
version number as in step 2 of Software Version.

Manual upgrade

Press c/d to select “Accessories”.
Press a/b to select “Software Upgrade”, and
then press OK. The TV checks all carriers if
there is a new software available for upgrade.
1 If upgrade via Over Air Download is available
at the time:
A confirmation message appears asking you to
accept the upgrade or not.
To download now, press c/d to select “Yes”, and
then press OK. After the upgrade is completed,
the TV restarts automatically with the new software
version installed.
To postpone the download, press c/d to select
“No”, and then press OK. Enter the download time
for more convenient time as instructed.
The software upgrade will not be carried out if
there is no new software available at the specified
download time.
2 If upgrade via Over Air Download is NOT
available at the time:
A message tells you that there is no software
available to be downloaded.
Check the new software version number to
confirm the successful upgrade.

Auto upgrade

When you tune to the service that provides the
upgrade via Over Air Download, a confirmation
message displays.
Follow the screen prompts.
Check the new software version number to
confirm the successful upgrade.
NOTE
• To scan all carriers for upgrade availability, perform the
manual upgrade.
• The software upgrade may take about 30 minutes, but may
take longer (up to 1 hour) depending on the signal status.
While updating, you cannot switch to TV or external input
mode or enter standby mode using B on the remote
control unit.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the
upgrade to fail. If problem arises ask a qualified
service personnel before the software upgrade
period expires.
1
2
3
1
2
3
Child Lock
Select
7Age/Rating
OK ENDDTV MENU
NOTE
• “Universal” and “Parental” are the ratings used exclusively
in France.
• “X-rated” is the rating used exclusively in Spain.
• For details about ratings see page 34.
Accessories
Check the version information of the digital module and
allow it to be upgraded (when available).
Software Version
Press c/d to select “Accessories”.
Press OK.
• The software version is displayed.
1
2
• “None”, “Children”, “Youth” and “Adult” are the ratings
used in Sweden (Please contact the organizations
concerned for details.).
27
LC-26D44E-gb.indd 27LC-26D44E-gb.indd 27 2008/02/19 10:21:442008/02/19 10:21:44