Quick guide
Setting the TV
Standard DIN45325 plug (IEC
Antenna
Connect the antenna cable from your
receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under goodAC cord reception conditions. Passive and active room
antennas are offered commercially. In an active antenna its power is supplied via the antenna input terminal.
The supply voltage (5V) must be correspondingly set under “Supply Voltage”. (See page 18.)
Bundling the cables
Place the TV close to the AC outlet, and keep the power plug within reach.
Product shape varies in some countries.
Cable clamp
Bundle the cables with the clamp.
Setting the TV on the wall
•This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 35.) The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
•The centre of the TV screen is 29 mm below “A” engraved onto the metal plate angle used for affixing to a wall.
•Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
•You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
4
