Protection against overturning

There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety.

Anchoring the TV to the wall or a pillar

1Fix the product with the 2 clamps (supplied), using the screws (supplied).

2Fix the TV to the wall using extrastrong ties (commercially available).

Fixing the TV to the table

View from the top

Cup hook (commercially available) Tie (commercially available)

Wall

Clamps (supplied)

1Lay the TV down on cushioning (such as a blanket) over a table.

2Attach the band (supplied) to the bottom of the stand using the screw (supplied).

3Transfer the product to the table where you intend to fix the TV.

4Fix the TV to the table by the band with a screw (commercially available).

Use a screw (commercially available) whose shape is compatible with the band.

CAUTION

 

 

Screws for attaching clamps (supplied)

Restraining band

Screw

 

(supplied)

(commercially

 

 

 

available)

 

 

 

Table

 

Thick soft cloth

Stand Screw for

 

(ex. Blanket)

 

 

band

Table

Restraining band

 

(supplied)

(supplied)

As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the product’s weight. The table should be set where it will not be overturned.

Dimensional drawings

535

451

797

699.2

393.8

Unit: mm

 

200

200

43.7

580

 

334

92115

262

26

Page 28
Image 28
Sharp LC-32L400X operation manual Protection against overturning, Dimensional drawings