Connecting the LCD TV to a PC
For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. Power off both computer and display before making any connections. Use
PC VGA Cable (Not supplied)
PC Input
(back)
Or
PC Audio Cable (Not supplied)
. Side AV Input
Using Side AV Connectors
You can connect a range of optional equipment to your LCD TV.
•For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.
•To listen the TV sound from headphones, connect to the HEADPHONE
jack of theTV.
AVCable (notsupplied)
Camera
Headphone
Remote Control Handset
Inserting Batteries
•Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.
•Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity
Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft.
Switching On/Off
To Switch the TV On
Connect the power cord to the
•Switch the “
” button on the bottom right hand side under the screen to position “” so the TV will switch to standby mode. Then the standby LED lights up.
•To switch on the TV from standby mode either:
•Press the “
” button, CH
/ CH
or a numeric button on the remote control.
•Press the “
” or +/- button on the TV.
•The TV will then switch on.
Note: If you switch on your TV via CH
/ CH
buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV to Standby
To switch the TV to low power stand by press the
“
” button on the remote control or right hand side of the TV.
Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.
To Switch the TV Off
•Switch the “
” button on the bottom right hand side under the
screen to position 2 as illustrated, 
to isolate the TV from the mains, the LED will go out.
•If the TV will not be used for a long period i.e. holidays, then unplug the power cord from the mains socket.
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources. Press “SOURCE” button on your remote control consecutively for directly changing sources.
Basic Operations
You can operate your TV using both the remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
•Press “
” button to decrease volume or “
” button to increase volume, so a volume level scale (slider) will be displayed on the screen.
Programme Selection
•Press “P/CH +” button to select the next programme or “P/CH
Viewing Main Menu
•Press “
” / “
” buttons at the same time to view main menu. In the Main menu select
and enter the 
” or “
” buttons. To learn the usage of the menus, refer to the menu system sections.
AV Mode
•Press the “TV/AV” button in the control panel on the TV to switch between AV modes.
Operation with the Remote Control
•The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.
Volume Setting
•Press “V+” button to increase the volume. Press
English - 10 -
