Sharp LC-37DB5U Connecting HDMI equipment, Displaying an image from HDMI equipment, INPUT, ENTER, ENTER, ENTER, HDMI equipment

Using external equipment

Connecting HDMI equipment

You can use the INPUT 4 terminal when connecting an HDMI equipment.

When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT4.

HDMI cable (Commercially available)

HDMI equipment

Displaying an image from HDMI equipment

1	To watch an HDMI equipment image, select
	“INPUT4” from “INPUT SOURCE” menu
	using INPUT on the remote control unit or
	on the TV. (See page 31.)
			INPUT SOURCE
			TV
			INPUT1
			INPUT2
			INPUT3
			INPUT4
2
	Press MENU and the MENU screen displays.
3	Press c/dto select “Option”.
4	Press a/bto select “HDMI Setup”, and then
	press ENTER.
		MENU [Option ... HDMI Setup]
		Option
		Audio Only
		Digital Noise Reduction		[Low]
		HDMI Setup
		Output Select		[Fixed]
		Quick Shoot		[Off]

5 Press a/b to select the desired item and press ENTER.

6 Press a/b/c/dto select the desired setting and press ENTER.

HDMI Setup	Selectable items	Description
items
Signal	RGB/YCbCr 4:4:4/	Select the video signal
Type	YCbCr 4:2:2	type from the HDMI
		terminal.
Color	ITU601/ITU709	Select the internal color
Matrix		space conversion method
		when an RGB signal is
		input.
Dynamic	Standard/	Select the signal amplitude
Range	Out of standard	range. Usually, select
		“Standard”.
Auto View	Enable/Disable	Set whether or not to use
		VIEW MODE based on
		signal recognition,
		including an HDMI signal.
Audio	Digital/Analog	Select “Digital” for audio
Select		signal via the HDMI
		terminal. Select “Analog”
		for audio signal via the R-
		AUDIO -L terminal.

NOTE

•Refer to your external equipment operation manual for the signal type.

29