Other viewing options

Freezing images

Allows you to capture and freeze an image from a moving image that you are watching.

1

Press FREEZE.

 

• A moving image is captured.

2

Press FREEZE again to cancel the function.

NOTE

•This function does not work in INPUT 4 (HDMI).

•When this function is not available, “No displaying still image available.” will display.

•The still image automatically goes out after 30 minutes.

•If you are using freeze function and a broadcast activates the V-CHIP BLOCK, freeze function will be cancelled and a V-CHIP BLOCK message will appear.

Presetting remote control function

You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit.

Presetting manufacturer codes

1 Press FUNCTION until the LED for your device lights up.

2 After the LED for your device lights up, if you press FUNCTION and DISPLAY and enter the code registration mode, the LED will blink.

3 Press 0 – 9 to enter the manufacturer code. (See page 45.)

•Preset mode is finished once the LED no longer lights up.

4 After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

44