Useful adjustment settings
PC INPUT mode adjustments
EPICTURE/SOUND adjustments
After connecting the PC to your TV (see page 23), you can adjust the “PICTURE” and “SOUND” modes to your preference setting with the following steps.
1 Press bto display the “EXT. SOURCES MENU” screen.
EXT. SOURCES MENU
TV
EXT1
EXT2
EXT2
EXT3
EXT3
EXT4
PC INPUT
SELECT | CONFIRM | EXIT |
2 Press a/bto select “PC INPUT”, and then press OK to display PC image on your TV.
3 For PICTURE setting:
Press MENU or Red to display PICTURE setting.
1Press a/bto select your desired PICTURE item.
(CONTRAST/BRIGHTNESS/PHASE/CLOCK)
CONTRAST |
|
| 50 |
2Press c/d to adjust the item to your desired position.
3Press END to exit.
For SOUND setting:
Press Green to display SOUND setting.
1Press a/bto select your desired SOUND item.
(VOLUME/BALANCE/LOUDNESS/DYN. BASS/ MODE)
VOLUME |
|
| 50 |
2Press c/dto adjust your desired position or select your desired item.
3Press END to exit.
EImage position
After connecting the PC to your TV (see page 23), you can adjust a picture’s horizontal or vertical position with the following steps.
1 Perform steps 1 to 2 in PICTURE/SOUND adjustments.
2 For adjusting H-POS/V-POS:
1Press c/dto centre the image by moving it to the left or right.
2Press a/bto centre the image by moving it to the up or down.
EPC compatibility chart
Resolution | Vertical Frequency | ||
60Hz | |||
|
| ||
|
|
| |
| 640 x 400 | O | |
VGA | 720 x 400 | O | |
|
|
| |
| 640 x 480 | O | |
WVGA | 848 x 480 | O | |
|
|
| |
SVGA | 800 x 600 | O | |
XGA | 1024 x 768 | O | |
WXGA | 1280 x 720 | O | |
1280 x 768 | O | ||
| |||
|
|
| |
SXGA | 1280 x 1024 | O | |
HD mode adjustments
Select the AV SETUP in SETUP menu. (See page 21.) And after selecting “HD” from “EXT4” in “AV SETUP” menu, you can adjust the “PICTURE” and “SOUND” modes to your preference setting when your TV receives HD signal image.
1
2 Press bto display the “EXT. SOURCES MENU” screen.
3
4 For PICTURE setting:
Press MENU or Red to display PICTURE setting.
1Press a/bto select your desired PICTURE item.
(CONTRAST/BRIGHTNESS/COLOUR/
SHARPNESS)
CONTRAST |
|
| 50 |
2Press c/d to adjust the item to your desired position.
3Press END to exit.
For SOUND setting:
Press Green to display SOUND setting.
1Press a/bto select your desired SOUND item.
(VOLUME/BALANCE/LOUDNESS/DYN. BASS/ MODE)
VOLUME |
|
| 50 |
2Press c/d/a/b to adjust your desired position or select your desired item.
3Press END to exit.
24
