Sharp LC-40LE530E Viewing the Connections Side Connectors, Power Connection, Aerial Connection

to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

7.PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC

8.HDMI 1: HDMI Input

HDMI Inputs are for connecting a device that has an HDMI socket. Your LED TV is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.

9.HDMI 2: HDMI Input

Viewing the Connections - Side Connectors

1.CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you

subscribe to. For more information, see “Conditional Access” section.

2. USB Inputs.

Note that programme recording feature is available via these USB inputs. You can connect external hard disk drives to this input.

3. Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

4. Side audio-video connection input is used for connecting video and audio signals of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector into the YELLOW input (located on the plural side) of the supplied AV connection cable. Colours of the connected jacks should match.

To enable audio connection, you must use RED and WHITE inputs of the side AV connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks should match.

Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50Hz.

•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

1 2 Aerial or Cable

English - 10 -

A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_40942LED_100Hz _ ROCKER_10073199_50190031.indd 10 09.08.2011 08:35:38