Sharp LC-37PX5X Setting the TV on the wall, Removing the stand, Example Hanging on the wall

Preparation

Setting the TV on the wall

•You can mount the TV on the wall, using the optional AN-37AG2 bracket.

•For details, refer to the instructions supplied with the optional bracket.

CAUTION

•This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

<Example>

Hanging on the wall

AN-37AG2 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting Angular mounting

Regarding the angle when mounting the TV on the wall

•The maximum angle to which you can tilt the wall-mounted TV is as follows. Do not tilt it more than the maximum angle.

LC-32PX5X 0°, 5°, 10°

LC-37PX5X

0°, 5°

LC-42PX5X

•Tilt the wall-mounted TV slowly when adjusting its angle.

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before detaching/attaching the stand

•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

•Remove all terminal covers and connected cables.

•Lay the TV down on cushioning (such as a blanket) over a table.

•Make sure two or more people perform the operation.

CAUTION

•Do not remove the stand from the TV unless using an optional bracket to mount it.

1

Hex key

Unfasten the four	in
place.

2

Detach the

(Hold theedge of the base

NOTE

• To attach the stand, perform the above steps in reverse order.

9