Useful adjustment settings
Power Control
Power Control setting allows you to save energy.
Power Control for AV source
No Signal Off
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
• Power control menu displays.
3Press a/b to select “Power Control”, and then press ENTER.
4Press a/b to select “No Signal Off”, and then press ENTER.
5Press a/b to select “Enable”, and then press
ENTER.
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
•“Disable” is factory preset value.
•When a TV programme fi nishes, and the TV receives signal input, this function may not operate.
No Operation Off
When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
• Power control menu displays.
3Press a/b to select “Power Control”, and then press ENTER.
4Press a/b to select “No Operation Off”, and then press ENTER.
5Press a/b to select “Enable”, and then press
ENTER.
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Power Control for PC source
Power Management
When set, the power will automatically shut down if no signal is input for a certain time.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
• Power control menu displays.
3Press a/b to select “Power Control”, and then press ENTER.
4Press a/b to select “Power Management”, and then press ENTER.
5Press a/b to select “Mode1” or “Mode2”, and then press ENTER.
Off
Mode1
Mode2
Selected item | Description |
|
|
Off | • No power management |
| • Factory preset value. |
|
|
Mode1 | • If no signal inputs for approximately 8 |
| minutes, the power shuts down. |
| • Even if you start using the PC and the |
| signal inputs again, the TV stays off. |
| • The TV turns on again by pressing |
| POWER. (See page 13.) |
|
|
Mode2 | • If no signal inputs for approximately 8 |
| seconds, the power shuts down. |
| • When you start using the PC and the |
| signal inputs again, the TV turns on. |
| • The TV turns on again by pressing |
| POWER. (See page 13.) |
|
|
NOTE
•If you turn off the power by disconnecting AC cord when setting “Mode2” in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit.
•Pressing POWER on the display will have the same result.
35
