Sharp LC-46XD1E, LC-52XD1E Geometry menu, Menu operations Miscellaneous, Picture horizontal

Menu operations

Miscellaneous

ENo signal off

When set to “Enable” the TV will automatically enter the standby mode if there is no signal input for 6 minutes.

TV menu ->Setup

Miscellaneous	Channels	Child lock
No signal off	Enable Disable
On-screen displays
Time and date

Geometry menu

You can set the geometry values of the picture such as picture position and phase relation. The adjustments are stored independently for each input mode.

TV menu

Geometry	Picture
Picture horizontal	0
Picture vertical	0
Phase position	0

NOTE

•When a TV programme fi nishes, this function may not operate.

•This function is not available in DTV mode.

EOn-screen displays

Here you can determine which on-screen displays are to be shown by pressing p on the remote control.

Items	Description
On-screen display	Sets the duration of the TV status and station
time	name display.
	• This setting also affects other TV screens.
	(Volume, Surround, etc.)
Sound mode	Sound mode display on/off (“yes”/“no”)

Picture horizontal

Sets the horizontal picture position by moving the picture left and right.

Picture vertical

Sets the vertical picture position by moving the picture up and down.

Phase position PC only

Adjusting the phase relation ensures a picture without fl icker and noise. (Available only for RGB signal)

Time

Time information display on/off (“yes”/“no”)

ETime and date

When you receive teletext, the correct date and time setting is picked up automatically by the set.

If you do not receive teletext, you should set the “Date” and “Time” manually. Also you have additional items you can adjust as outlined below.

NOTE

•Time and date information confi gured manually cannot be overridden automatically by the set.

•If the power to the set is cut off (disconnection of AC cord, power outage, etc.), the auto time acquisition mode through teletext reactivates.

Items	Description
Time	If you receive a station with teletext after
	switching on your TV set, the time and date are
	automatically registered. In the case of some
	stations, the date may have to be entered
	manually. For stations without teletext, enter the
	time (00:00 to 23:59) and the date (day.month.
	year) using the numeric buttons on the remote
	control.
Date	See the above item “Time”.
Beginning of	Enter the date for the beginning of daylight-
daylight-saving	saving time if it deviates from the date
time	calculated automatically.
End of daylight-	Enter the date of the end of daylight-saving
saving time	time if it deviates from the date calculated
	automatically.

18