Basic adjustment
Analogue channel settings
Setup
Programme Setup
Analogue setting
You can reconfigure Analogue TV channels settings automatically or manually.
EAdditional search
Use this menu to add new channels automatically after auto installation has been made.
•Start searching channels after selecting colour system and sound system.
EManual Adjust
Use this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press a/b/ c/d to select the channel you want to set and the press OK.
Fine
You can adjust the frequency to the desired position.
NOTE
•Adjust while checking the background picture as a reference.
•Instead of pressing c/d to adjust the frequency, you can set by directly entering the frequency number of the channel with 0 - 9.
EXAMPLE
•179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
•49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
Colour sys.
Select the optimum colour system to receive. (Auto, PAL, SECAM)
Sound sys. (Broadcasting systems)
Select the optimum sound systems (Broadcasting systems) to receive. (B/G, D/K, I, L/L’)
Label
When a TV channel sends its Network Name, the Auto Installation detects the information and assigns a name to it. However, you can change individual channel names.
1Press a/b/c/d to select each character of the new name for the channel, and then press OK.
2Repeat step 1 above until the name is fully spelt out.
NOTE
•The name can be 5 characters or less.
•If a channel name is less than 5 characters, select “END” to set the channel name.
Skip
Channels with “Skip” set to “On” are passed over when using Pr/Pseven if selected while watching the image from the TV.
Decoder
When connecting a decoder to the unit, you need to select EXT1 or EXT2.
NOTE
• “Off” is factory preset value.
Lock
You can block the viewing of any channel.
NOTE
•See “Child Lock” for setting a PIN.
•When Lock is set to “On” for a channel, “Child lock has been activated.” displays, and the image and sound of the channel are blocked.
•When pressing 6while “Child lock has been activated.” displays, the PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off.
ESort
Channel positions can be sorted freely.
1Press c/d to select “Yes”, and then press OK.
2Press a/b/c/d to select the channel you want to move, and then press OK.
3Press a/b/c/d to move it to the desired position, and then press OK.
4Repeat steps 3 and 4 until all desired channels are sorted.
EErase Programme
An individual programme can be erased.
1Press c/d to select “Yes”, and then press OK.
2Press a/b/c/d to select the channel you want to erase, and then press OK.
• A message screen pops up.
3Press c/d to select “Yes”, and then press OK to erase the selected programme. All the subsequent programmes move up.
4Repeat steps 3 and 4 until all desired channels are erased.
27
