37

View settings

Go to “Menu” > “Setup” > “View setting”
Setup
Quick start
Auto installation
View setting
Channel settings
CH list
:Back:Enter
Menu
Individual setting
View setting

Auto installation

The TV automatically detects and stores all available
services in your area. This function also allows you
to perform the channel setting for digital, satellite
and analogue individually and reconfigure the
settings after the initial auto installation has been
completed.

1Go to “Menu” > “Setup” > “View setting” >

“Auto installation”.

2Press c/d to select “Yes”, and then press ;.

3Press a/b/c/d to select the desired

language, and then press ;.
NOTE
• PIN input is required when executing “Auto installation”.
The default PIN is “1234”. To change the PIN setting,
refer to Individual setting - PIN (Page 40). To reset the
PIN setting (PIN input will no longer be needed), refer to
Reset the PIN (Page 74).
• You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If
you want to reconfigure those settings, automatically
execute initial auto installation after executing “Reset”
from the “Setup” menu.
• The current country setting is displayed on the screen.

4Press a/b to select the broadcast standard

you want to search, and then press ;.
EDigital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on page 15.
EAnalogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 15.
ESatellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer to
the “Satellite search” setting on pages 16_17.
Important information:
Satellite services are only available for the 830 model
series.
NOTE
• After selecting “Next” in the DVB-S/S2 setting screen,
you need to select your preferred satellite broadcast to
start searching.
View setting

Programme setup

You can reconfigure the DTV service settings
automatically or manually.

1Go to “Menu” > “Setup” > “View setting” >

“Channel settings” > “Programme setup”.

2Press a/b to select the broadcast standard

you want to reconfigure, and then press ;.
NOTE
• PIN input is required when executing “Programme
setup”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting - PIN (Page 40).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 74).

Digital setting

Terrestrial

You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or
the “Auto installation” menu.
EAdditional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation” menu
has been completed.
EManual search
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
• You can perform “Manual search” with a service number
only when the five Nordic countries have been selected
in the country setting.
E Manual adjust
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Service
no.
Lock
Service
name
Lock CH skip Old LCN
CH skip SortDelete

1Press a/b to select the desired service.

2Press the colour button on the remote control

unit corresponding with the item you want to
reconfigure.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
Basic adjustment