61
Wireless installation
Use the wireless LAN USB adapter supplied with the
TV.
EWireless connection overview
PC
Wireless LAN router/access point
Wireless LAN USB adapter (supplied)
Network
NOTE
• When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the
device for best performance.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
• Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
EHow to connect
1Switch on your router before starting the
network installation.
2Connect the wireless LAN USB adapter
(supplied) to the USB 3 (WIRELESS LAN) port on
the rear of the TV.
• Do not use a wireless LAN adapter other than
the supplied SHARP wireless LAN adapter, as
operations cannot be guaranteed.
3Go to “Menu” > “Setup�� > “View setting” >
“Network setup” > “Connection type”.
4Press c/d to select “Wireless”, and then press
;.
5Select “OK” to confirm.
6Press a/b to select “Wireless setup” in the
“Network setup” menu.
7Press c/d to select “Change”, and then press
;.
8Press a/b to select “WPS”, and then press
;.
WPS
Search
Manual Setup
• If your router/access point does not support WPS
(= Wi-Fi Protected Setup), select “Search” and
follow the on-screen instructions and the operation
manual of the router/access point.
• To establish the connection manually, select
“Manual setup” and follow the on-screen
instructions and the operation manual of the router/
access point.
9Press a/b to select “Push button”, and then
press ;.
Push button
PIN code
• To establish the connection manually, select “PIN
code”. Follow the on-screen instructions and the
operation manual of the router/access point.
0
Select “Next” to proceed.
Q
Press the WPS button on the router/access
point. When you press the WPS button, a
progress bar will appear on the display. Wait
until the connection is established.
Select “OK” when the connection details are
displayed.
• If you have failed to connect to the internet in the
above operation, an error message will appear. In
this case, press ATV/DTV/SAT/b to return to the
normal TV screen and check the relevant settings.
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• There is no need to enter the security key for
subsequent connections to the wireless network.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
• If you want to change the IP settings manually, go to
“Menu” > “Setup” > “View setting” > “Network setup” >
“IP setup” and follow the on-screen instructions and the
operation manual of the router.
• See page 79 to check the supplied SHARP wireless LAN
adapter specifications.