Other Viewing Options
Presetting Remote Control Function
You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit.
1
2 | 7 |
3 | 8 |
4 | 9 |
5 | 10 |
6
11
12
13
14
Presetting manufacturer codes
1Press an appropriate button (STB, DVD•VCR or AUDIO) to operate the connected equipment.
2Press an appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY at the same time to enter the code registration mode.
3Press
•Preset mode is fi nished once the LED no longer lights up.
4After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)
Operating the Connected Equipment
To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB (cable/satellite
•When you operate VCR, BD or DVD, press INPUT to select the terminal connected to your device.
•CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)
• Turns the connected equipment power on and off.
2,
• Starts playback. (VCR, BD, DVD)
3*
•Rewinds the tape and allows picture search. (VCR)
•Hold down to go in reverse. (BD, DVD)
4+
•Stops the tape transport. (VCR)
•Playback stops when pressed. With some
5.
•Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter. (BD, DVD)
6 0–9, • (DOT) (STB)
•Press a button (or buttons) that corresponds to the channel that you wish to watch.
7-
•Rapidly advances the tape and allows picture search. (VCR)
•Hold down to fast forward. (BD, DVD)
8)
• Sets pauses and still pictures. (VCR, BD, DVD)
9/
•Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter. (BD, DVD)
10(REC
•Starts recording. (VCR)
11FLASHBACK
•Press to switch between the current channel and the channel you were watching immediately before. Some manufacturers do not preset FLASHBACK. (STB)
12CHU/V
•Press CHUor CHVto tune in to a higher or lower channel. (STB)
•Press to select the channel of the TV tuner on the VCR. (VCR)
13MENU
•When this button is pressed, the BD/DVD menu will display. (BD, DVD)
14a/b/c/d, ENTER
•a/b/c/d: Press the button to select items on the STB GUIDE screen or STB MENU screen. (STB)
Press the button to select items on the BD/DVD menu screen. (BD, DVD)
•ENTER: Press to activate the selected function. (STB, BD, DVD)
49
