Sharp LC70LE735U Connecting a Cable/Satellite Set-top Box, Connecting Multiple Devices to the TV

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.

ENGLISH

Connecting an Antenna/Cable

Connecting an HD Cable/Satellite Set-top Box

Check the type of antenna cable you are using.

(for receiving cable-TV without a set-top box, including unscrambled cable HD channels, or off-air HDTV broadcasts)

1. A 75-ohm system is generally	Home Antenna
	terminal (75-ohm)	Coaxial cable
a round cable with F-type	Cable TV lead-In
connector that can easily be
attached to a terminal without	F-type connector
tools (commercially available).	75-ohm
2. A 300-ohm system is a fl at	coaxial cable (round)
	300/75-ohm adapter
“twin-lead” cable that can be
attached to a 75-ohm terminal	300-ohm
through a 300/75-ohm adapter
(commercially available).	twin-lead cable
		Combiner

■When using HDMI cable (HDMI 1, 2, 3 or 4):

The HDMI (High Defi nition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and video signals using a single cable. The HDMI terminal supports high-resolution video input.

Cable

IN
OUT	HDMI
	LINE OUT

When you connect external equipment using a DVI-HDMI conversion cable or when you connect ARC-compatible equipment, use HDMI 1.

Back panel vertical inputs

3. A separate VHF/UHF antenna	300-ohm	IN OUT
has two antenna cables. Use	twin-lead cable
a combiner (commercially	300-ohm
available) to connect the antenna		or
cables to a 75-ohm terminal.	twin-lead cable
	75-ohm coaxial cable

For information on the antenna type, see the operation manual of your TV.

Connecting a Cable/Satellite Set-top Box

You can use the VIDEO terminal with a component cable.

VIDEO (Yellow)

AUDIO-L (White)

AUDIO-R (Red)

Cable

IN
OUT	LINE OUT	Back panel
		surface inputs

■When using DVI-HDMI conversion cable (HDMI 1):

When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in

addition to connecting a DVI-HDMI conversion cable to		Back panel
the HDMI 1 terminal, connect a ø 3.5 mm stereo minijack		horizontal inputs
cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog".
Cable
		Back panel
LINE OUT		vertical inputs
IN
OUT	DVI
AUDIO

■When using Component cable (COMPONENT):

AUDIO-L (White)	Back panel
	surface inputs

Cable

AUDIO-R (Red)

IN	COMPONENT OUT
OUT

PR (Red)	Y (Green)
	PB (Blue)

Connecting Multiple Devices to the TV

Connecting an HD Cable/Satellite Set-top Box, Blu-ray Disc/DVD Player and Amplifier Connecting a Cable/Satellite Set-top Box and VCR

Cables required:

1Coaxial cable

2HDMI-certifi ed cable

3 Optical fi ber cable

You can connect the TV using a splitter only when the connection involves a cable set-top box. When you use the satellite set-top box, connect a dedicated cable directly to the satellite set-top box.

Cable	Back panel
	horizontal inputs
Splitter	



Back panel vertical inputs

HD Cable/ Satellite set-top box

Cables required:	You can connect the TV using
1 Coaxial cable	a splitter only when the	
	connection involves a cable
2 Composite cable
	set-top box. When you use the	Cable	Back panel
	satellite set-top box, connect		horizontal inputs
	a dedicated cable directly to
Cable/Satellite	the satellite set-top box.	
set-top box		Splitter

LINE OUT	IN
VCR

OUT		When connecting the
		TV without the use of
		a cable/satellite set-	Back panel
		top box, connect the
		antenna cable to the	surface inputs
		RF-IN terminal on the
		VCR.

VCR
LINE
IN	IN
LINE	OUT
OUT

DIGITAL	IN	LINE OUT	
AUDIO		HDMI

OUT

AUDIO-R (Red)	VIDEO
AUDIO-L (White)
	(Yellow)



Blu-ray disc/		The above is a connection example. For information on connecting external equipment to the
DVD player		TV, see the operation manual of the equipment.

AUDIO		Connecting a PC
DIGITAL	HDMI



				PC	RGB cable	Back panel surface inputs
					(D-sub 15-pin cable
					or VGA cable)
		Amplifier
					RGB
					ø 3.5 mm stereo	Back panel
DIGITAL	TV				minijack cable	horizontal
AUDIO					or
						inputs
					AUDIO
			or		DVI-HDMI conversion cable

		Back panel
	DVI OUT	vertical inputs
The above is a connection example. For information on connecting external equipment to the	The above is a connection example. For detailed information on the connection, see the
TV, see the operation manual of the equipment.	operation manual of the equipment.

The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.