Sharp LC 20S4U NO SIGNAL OFF, NO OPERATION OFF, PICTURE FLIP

Useful Features (Continued)

Power control setting allows you to save energy.

When set to “ENABLE”, the power will automatically shut down if no signal inputs for 5 minutes.

1 Press MENU to display the Menu screen.

2 Press \/to select “OPTION”.

3 Press '/" to select “NO SIGNAL OFF”, and press

ENTER.

4 Press '/" to select “ENABLE”, and press ENTER.

E N A B L E

D I S A B L E

5 Press MENU to exit.

•“DISABLE” is factory preset value.

•This function can work only in TV mode.

•If interfered with by other broadcast or radio waves, “NO SIGNAL OFF” may not work properly even when the broadcast is over.

When set to “ENABLE”, the power will automatically shut down if there is no operation for 3 hours.

1 Repeat steps 1 and 2 of NO SIGNAL OFF.

2 Press '/" to select “NO OPERATION OFF”, and press ENTER.

3 Press '/" to select “ENABLE”, and press ENTER.

E N A B L E

D I S A B L E

•5 minutes before the power shuts down, remaining time is displayed every minute.

4 Press MENU to exit.

• “DISABLE” is factory preset value.

You can set the orientation of the picture.

Setting the PICTURE FLIP on the MENU screen

1 Repeat steps 1 and 2 of NO SIGNAL OFF.

2 Press '/" to select “PICTURE FLIP”, and press

ENTER.

3 Press '/" to select the desired mode, and press

ENTER.

N O R M A L

M I R R O R

R O T A T E

U P S I D E D O W N

4 Press MENU to exit.

Directly setting the PICTURE FLIP

1 Press PIC.FLIP to display the PICTURE FLIP screen.

2 Press PIC.FLIP to change the setting.

PICTURE FLIP [NORMAL] PICTURE FLIP [MIRROR]

PICTURE FLIP [UPSIDE DOWN] PICTURE FLIP [ROTATE]